Vision Encoder (ViT) CUDA Graphs¶

The CUDA Graphs infrastructure in vLLM primarily targets the decoder (language model) forward pass. vLLM also supports capturing the encoder (vision transformer) forward pass as CUDA Graphs, independently from the decoder. This is based on Pull Request #35963.

For two-tower vision encoders (e.g., DeepSeek-OCR's SAM + CLIP with dynamic tiling), a dual-path graph mode captures two independent sets of CUDA graphs — one for the global image path and one for the local patch path — enabling independent budget selection and partial eager fallback per path. This is based on Pull Request #43586.

Compatibility Matrix¶

Model x Feature¶

Model x Hardware¶

Motivation¶

Vision encoder inference incurs CUDA kernel launch overhead on the host side. The overhead is more significant when the batch size is small or image size is small.

Encoder CUDA Graphs eliminate this overhead by pre-capturing the full encoder forward pass at multiple token budget levels during model initialization, then replaying the appropriate graph at runtime.

For two-tower vision encoders such as DeepSeek-OCR (SAM + CLIP with dynamic tiling), the global image path and local patch path have independent token profiles (272 tokens per global image vs. 100 tokens per local patch). Capturing a single monolithic graph for both paths would significantly reduce packing efficiency. The dual-path graph mode captures each path as a separate set of budgets, allowing the manager to pack and replay each path independently.

Design¶

The encoder CUDA Graph system uses a budget-based capture/replay strategy, managed by EncoderCudaGraphManager. The system contains the following core components:

• EncoderCudaGraphManager: orchestrates capture, replay, greedy packing, and data-parallel execution for encoder CUDA Graphs.
• SupportsEncoderCudaGraph: a runtime-checkable protocol that models implement to opt-in to encoder CUDA Graphs.
• EncoderItemSpec: describes a single encoder input item (image or video) with its input size and output token count.
• BudgetGraphMetadata: holds the captured CUDA Graph and its associated I/O buffers for a single token budget level.

Budget-based graph capture¶

Multiple CUDA Graphs are pre-captured at different token budget levels (e.g., [2048, 4096, 8192, 13824]). Each budget defines a fixed token capacity, and all budgets share the same maximum batch size (number of images). The BudgetGraphMetadata for each level stores the graph along with pre-allocated input, metadata, and output buffers:

@dataclass
class BudgetGraphMetadata:
    token_budget: int
    max_batch_size: int
    max_frames_per_batch: int
    graph: torch.cuda.CUDAGraph
    input_buffers: dict[str, torch.Tensor]  # e.g. pixel_values, embeddings, seq metadata
    output_buffer: torch.Tensor      # encoder hidden states

Budgets are auto-generated as power-of-2 levels from a model-provided range via get_encoder_cudagraph_budget_range(), with the maximum budget always included even if it does not fall on a power-of-2 boundary. Budgets can also be explicitly specified by the user via encoder_cudagraph_token_budgets in CompilationConfig.

Each entry in EncoderCudaGraphConfig.paths defines an independently captured encoder path. A path can provide its own minimum token budget and opt into zero-token batches; the manager generates and stores a separate budget graph set for every configured path.

Greedy bin-packing at runtime¶

When a batch of images arrives, the manager sorts images by output token count (smallest first) and greedily packs as many images as possible into each sub-batch while staying within the largest token budget and the maximum batch size. Once a sub-batch is finalized (the next image would overflow either constraint), the manager finds the smallest budget that fits the sub-batch's total tokens and replays the corresponding CUDA Graph. This repeats until the batch is exhausted. Images that exceed all budgets fall back to eager execution.

For multi-path models, the same greedy packing loop constrains every configured path simultaneously (see Multi-Path graph capture).

For each graph replay:

1. Call prepare_encoder_cudagraph_replay_buffers() to compute buffer values (including pixel_values and precomputed metadata) from actual batch inputs.
2. Zero the pre-allocated input_buffers, then slice-copy the replay values into them.
3. Replay the CUDA Graph.
4. Clone outputs from output_buffer (cloning is necessary since the buffer is reused across replays).

Multi-Path graph capture¶

EncoderCudaGraphConfig.paths maps path names to EncoderCudaGraphPathConfig capture policies. For example, DeepSeek-OCR configures a global image path and a local patch path, which are captured independently under budget_graphs["global"] and budget_graphs["local"].

Budget generation. Each path gets a separate budget list. For DeepSeek-OCR:

• the global path — power-of-2 budgets starting at the global path minimum (e.g., [272, 544, 1088, 2176, 4352, 8704, 13824] for DeepSeek-OCR).
• the local path — power-of-2 budgets starting at the local path minimum (e.g., [0, 100, 200, 400, 800, 1600, 3200, 6400, 12800, 13824] for DeepSeek-OCR). A budget of 0 is included when allow_zero_tokens=True to handle images with no local patches (images ≤ 640×640 that produce only global features).

Both lists are capped at the same max_budget.

Multi-path greedy packing. Each EncoderItemSpec provides path_output_tokens, mapping each path to its contribution for that item. The packing algorithm constrains every path simultaneously:

• Sort images by total output tokens (global + local), smallest first.
• Greedily pack images: an image is added to the current sub-batch only if every accumulated path token count is within that path's maximum budget, with the image count ≤ max_batch_size.
• Once any path constraint would overflow, finalize the sub-batch and find the smallest fitting budget independently for each path.
• Repeat until all images are packed.

Partial graph fallback. For each non-empty path, the manager replays the smallest fitting graph or runs only that path eagerly when no graph fits. Paths with zero tokens are skipped; a 0-budget graph is never captured or replayed.

Buffer keys per path. Global and local paths use different buffer keys. For DeepSeek-OCR, the global path uses pixel_values (full images, shape [B, 3, 1280, 1280]) while the local path uses images_crop (patches, shape [P, 3, 1024, 1024]). The manager iterates over each captured graph's own input_buffers.keys() rather than a shared buffer_keys list, so both paths can use different buffers.

Post-processing. The postprocess_encoder_output method receives an outputs dictionary keyed by path name. The model is responsible for assembling global and local features into the final per-image embedding. For DeepSeek-OCR, it reshapes the global output into [B, 272, n_embed], reshapes the local output into [P, 100, n_embed], assembles patch grids with newline tokens, and concatenating [patches_grid, global, view_separator] for each image.

Data-parallel support¶

When mm_encoder_tp_mode="data", the manager distributes images across TP ranks using load-balanced assignment via get_load_balance_assignment, executes locally on each rank, then gathers results back in the original order via tensor_model_parallel_all_gather.

Video inference support¶

Following Pull Request #35963 (ViT full CUDA graph support for image inference), Pull Request #38061 extends the encoder CUDA graph framework to support video inference for Qwen3-VL. Previously, the CUDA graph capture/replay path only handled image inputs (pixel_values + image_grid_thw). Video inputs use different keys (pixel_values_videos + video_grid_thw) and require larger cu_seqlens buffers because each video item contributes multiple frames (T attention sequences). This PR generalizes the protocol and manager to handle both modalities through a single shared graph manager.

Model integration via SupportsEncoderCudaGraph¶

Models opt-in to encoder CUDA Graphs by implementing the SupportsEncoderCudaGraph protocol. This protocol encapsulates all model-specific logic so that the manager remains model-agnostic. The protocol defines the following methods:

• get_encoder_cudagraph_config() — returns static configuration (supported modalities, buffer keys, output hidden size, padding logics, max frames per video).
• get_encoder_cudagraph_budget_range(vllm_config) — returns (min_budget, max_budget) for auto-inference of token budgets.
• get_encoder_cudagraph_item_specs(mm_kwargs) — returns list[EncoderItemSpec] describing each item with its input size, total output token count (output_tokens), and per-path token counts (path_output_tokens) for multi-path models.
• select_encoder_cudagraph_items(mm_kwargs, indices) — extracts a sub-batch of items by index, used during greedy packing and DP sharding.
• prepare_encoder_cudagraph_capture_inputs(..., path="default") — creates dummy inputs for graph capture. The path parameter ("global" or "local") tells the model which path to generate dummy inputs for. Returns EncoderCudaGraphCaptureInputs with a single values: dict[str, torch.Tensor] that contains all buffers to be recorded into the graph.
• prepare_encoder_cudagraph_replay_buffers(mm_kwargs, max_batch_size, max_frames_per_batch, path="default") — computes buffer values from actual batch inputs. The path parameter selects which modality keys to extract from mm_kwargs. Returns EncoderCudaGraphReplayBuffers with a values dict whose keys match the captured graph's input_buffers.keys().
• encoder_cudagraph_forward(inputs: dict[str, torch.Tensor], path="default") — forward pass accepting only fixed-shaped input tensors (the captured values dict). Called during both capture and replay. The path parameter dispatches to the correct encoder sub-module (e.g., global vs. local path for DeepSeek-OCR).
• encoder_eager_forward(mm_kwargs, path="default") — fallback eager forward when no graph fits. When path is "global" or "local", runs only that encoder path without graph capture.
• postprocess_encoder_output(outputs, ...) — post-process encoder outputs keyed by path name, enabling multi-path models to assemble their path-specific features into the final per-item embedding.

Configuration¶

Four fields in CompilationConfig control encoder CUDA Graphs:

• cudagraph_mm_encoder (bool, default False) — enable CUDA Graph capture for multimodal encoder. When enabled, captures the full encoder forward as a CUDA Graph for each token budget level.
• encoder_cudagraph_token_budgets (list[int], default []) — token budget levels for capture. If empty (default), auto-inferred from model architecture as power-of-2 levels. User-provided values override auto-inference.
• encoder_cudagraph_max_vision_items_per_batch (int, default 0) — maximum number of images/videos per batch during capture. If 0 (default), auto-inferred as max_budget // min_budget.
• encoder_cudagraph_max_frames_per_batch (int, default None) — maximum number of video frames per batch during capture. If None (default), auto-inferred as encoder_cudagraph_max_vision_items_per_batch * max_frames_per_video (max_frames_per_video is a model-specific value from EncoderCudaGraphConfig, computed by get_max_frames_per_video() on the model). If we limit the video count per prompt to 0, it will also be set to 0 (i.e., fall back to image-only mode).

Multi-path mode is configured at the model level through EncoderCudaGraphConfig.paths. Each EncoderCudaGraphPathConfig can set a path-specific minimum budget and whether zero-token batches are allowed. The manager automatically generates separate budget lists and uses the same execution loop for single- and multi-path models.

Usage guide¶

Image inference¶

Enable encoder CUDA Graphs via compilation_config:

vllm serve Qwen/Qwen3-VL-32B \
  --compilation-config '{"cudagraph_mm_encoder": true}'

For Llama 4 (image only):

vllm serve meta-llama/Llama-4-Scout-17B-16E-Instruct \
  --limit-mm-per-prompt '{"image": 1}' \
  --compilation-config '{"cudagraph_mm_encoder": true}'

With explicit budgets:

vllm serve Qwen/Qwen3-VL-32B \
  --compilation-config '{"cudagraph_mm_encoder": true, "encoder_cudagraph_token_budgets": [2048, 4096, 8192, 13824], "encoder_cudagraph_max_vision_items_per_batch": 8}'

Python example:

import vllm

compilation_config = {
    "cudagraph_mm_encoder": True,
    # Optional: override auto-inferred budgets
    # "encoder_cudagraph_token_budgets": [2048, 4096, 8192, 13824],
    # "encoder_cudagraph_max_vision_items_per_batch": 8,
}

model = vllm.LLM(
    model="Qwen/Qwen3-VL-32B",
    compilation_config=compilation_config,
)

The manager tracks hit/miss statistics and logs them periodically. A "hit" means an image was processed via CUDA Graph replay; a "miss" means eager fallback (image exceeded all budgets).

Video inference¶

Enable encoder CUDA Graphs via compilation_config:

vllm serve Qwen/Qwen3-VL-32B \
  --compilation-config '{"cudagraph_mm_encoder": true}'

With explicit budgets:

vllm serve Qwen/Qwen3-VL-32B \
  --compilation-config '{"cudagraph_mm_encoder": true, "encoder_cudagraph_token_budgets": [2048, 4096, 8192, 13824], "encoder_cudagraph_max_vision_items_per_batch": 8, "encoder_cudagraph_max_frames_per_batch": 64}'

Python example:

import vllm

compilation_config = {
    "cudagraph_mm_encoder": True,
    # Optional: override auto-inferred budgets
    # "encoder_cudagraph_token_budgets": [2048, 4096, 8192, 13824],
    # "encoder_cudagraph_max_vision_items_per_batch": 8,
    # "encoder_cudagraph_max_frames_per_batch": 64,
}

model = vllm.LLM(
    model="Qwen/Qwen3-VL-32B",
    compilation_config=compilation_config,
)

Benchmark Results¶

The following benchmarks were run on Blackwell GPUs (GB200) using vllm bench mm-processor. See #35963 for full details.

Single GPU (1x GB200)¶

Model: Qwen/Qwen3-VL-30B-A3B-Instruct, dataset: lmarena-ai/VisionArena-Chat (3000 prompts, 300 warmup), max_model_len=32768.

To reproduce:

vllm bench mm-processor \
  --model Qwen/Qwen3-VL-30B-A3B-Instruct \
  --dataset-name hf --dataset-path lmarena-ai/VisionArena-Chat \
  --num-prompts 3000 --num-warmups 300 \
  --max-model-len 32768 --seed 42 \
  --mm-encoder-attn-backend FLASH_ATTN \
  --compilation-config '{"cudagraph_mm_encoder": true, "encoder_cudagraph_token_budgets": [512, 1024, 1536, 2048, 2560, 3072, 3584, 4096, 4864], "encoder_cudagraph_max_vision_items_per_batch": 8}'

Multi-GPU (4x GB200, TP=4, DP=4)¶

Model: Qwen/Qwen3-VL-32B-Instruct, dataset: random-mm (1000 prompts, 200 warmup, 20 images/request at 336x336), max_model_len=8192.

To reproduce:

vllm bench mm-processor \
  --model Qwen/Qwen3-VL-32B-Instruct \
  --dataset-name random-mm \
  --random-mm-base-items-per-request 20 \
  --random-mm-num-mm-items-range-ratio 0.0 \
  --random-mm-bucket-config '{"(336,336,1)": 1.0}' \
  --num-prompts 1000 --num-warmups 200 \
  --max-model-len 8192 --seed 42 \
  --mm-encoder-attn-backend FLASHINFER \
  --tensor-parallel-size 4 --mm-encoder-tp-mode data \
  --compilation-config '{"cudagraph_mm_encoder": true, "encoder_cudagraph_token_budgets": [512, 1024, 1536, 2048, 2560, 3072, 3584, 4096, 4864], "encoder_cudagraph_max_vision_items_per_batch": 8}'